A few tips to help you solve the problem of the faucet dripping

The faucet in use for a period of time, many will appear dripping or leaking situation, most buyers have directly replaced the faucet, if the faucet is still in service life, directly replacing the faucet will cause a lot of waste of resources. Here, the faucet manufacturer tells you some tips to solve the faucet drip leakage. Faucet drip leakage is often caused by bad parts. The reason for leakage of the gap in the lower part of the tap tie is caused by the wear of the triangular sealing pad in the cover.

At this time, you can use the screw to loosen the tie head, then loosen the cover, and then take out the inner triangle seal shop of the cover and replace it with a new one. There may also be the problem that the wear of the axle gasket in the faucet can also lead to the drip leakage of the faucet. As long as the clamp is used to loosen the cover tie and remove it, the axle gasket is taken out by the clamp, and a new axle gasket can be replaced to solve the problem of the water leakage of the faucet. There are many reasons for the leakage of the faucet, some of which are caused by the replacement of the inner parts. As long as the broken parts are replaced, the whole faucet does not need to be replaced, and resources can be saved very well.

Leave a Reply

Your email address will not be published. Required fields are marked *